You Are Buying Directly From Manufacturer's Brand--We Make 40,000+ Helmets Annually, Since 25th August 2017, We Became The First Manufacturer In China, And One Of The Only Few In The World That Makes Full Cut, Mid Cut, High Cut and Super High Cut Ballisitc Helmets
*** Aramid Core (Imported Twaron) Shell Construction
*** 4 point OCC Dial Liner Gen 2 3D Anti Slip Rubber Coated Size Adjustable Knob & EPP Foam Padding
*** Slot Enabled Side Rails For Cable Routing
*** Skeleton Aluminum NVG Mount
*** New Sticky Loops Pattern
*** Slide Lock Buckle Liner System, More Stable And More Convenient To Adjust
*** High Strength Mil Spec Nylon Webbing Suited To Helmet Color (Only Available For Solid Colored Helmets)
*** Ballistic Screws
*** Metal Clot Bungee Ends
*** New Helmet Bag With YKK Zipper And UTX Accessory
*** Available in Oliver Drab (OD), Black (BK), Foliage Green (FG), Coyote Brown (CB), Desert Tan (DE), Multicam (MC), Atacs FG, Atacs AU, Desert Digital Camo and Woodland Digital Camo
*** 1.39kg(S/M), 1.4kg (M/L) , 1.45kg (L/XL) and 1.56kg(XL/XXL) fully assembled
*** Size S/M (Fits 53-56cm Headrim), Size M/L (Fits 55-59cm headrim, US Size 7 1/4 - 7 5/8) and L/XL (Fits 58-61cm headrim, US Size 7 3/8 - 7 3/4), Size XL/XXL (Fits 61-64cm headrim, US Size 7 5/8 - 8)
*** Fully NIJ IIIA 0106.01 Compliant, Tested by .44 Magnum and .357 SIG, No penetration at all.
*** US D.O.D 9mm Trauma Protocol Compliant, Front and Back MAX BFD Allowed Is Less Than 25mm, Both Sides And Crown MAX BFD Must Be Less Than 16mm--This Is So Far The Highest BFD Requirement In The USA FOR BALLISTIC HELMET PERFORMANCE ) Much Better Than UHMW-PE Made Helmet's Performance (UHMWPE BFD Usually Between 22mm - 33mm)
## Test Report In BMT Lab, Australia Below Shown Lowest BFD (Backface Deformation) Is 2mm And Highest is 10mm (USA Department of Defence Requires 5 Shots Test On 9mm
## Test Report In OBL Lab, USA Below Shown With None Backface Deformation More Than 11mm
*** This Helmet Also Passed Ballisitc Impact Attenuation Test (Only Available In NIJ IIIA 0106.01 Compliance Tested Helmets)
*** V50 Ballistic Limit Tested According To EU Stanag 2920 & USA MIL-STD-662F Standards, Results Tested Is Between 700m/s (2296 ft/s) to 740m/s (2427 ft/s)
*** CO/PD-05-04 Sections 3.12.11 & 3.12.12 Drop Tested & Compression Tested--Fully Comply And Matches Ops Core's Quality. Top-Bottom = .020” (0.51 mm) Max @ 400 lbs. (181.44 kg), Side-Side = .125” (3.18 mm) Max @ 300 lbs. (136.08 kg) per MICH Type II FQ/PD 06-35C: 2013
Warranties and Testing Videos
*** Click here to learn more about our ballistic helmets Warranty
*** Click here—Part 1 Russian customer's review of our helmet and the Ops Core's FAST Helmet
*** Click here—Part 2 Russian customer’s shooting test review--You can't miss this! (Our helmet was tested by Steel Core Pistol Bullets With No Penetration Result)
Check Our Testing Video Here
Click Here To Watch FAST Helmet's Evaluation Video
--Presented By IPSC Russia
Click Here To Watch FAST Helmet's Destructive Testing Video
--Presented By IPSC Russia
Test Reports and Standards You Should Know About Ballistic Helmet:
Tests Were Performed By Australian's The Only Independent Ballistic Testing Lab—BMT, results proven our product quality meets our description, to know more about BMT, please visit http://www.armourtesting.com
US DOT&E’s BFD protocol--Never heard of that? This is USA's Department Of Defense (D.O.D) Test Standard Specifically Set For Ballistic Helmet's 9mm Impact Back Face Deformation (BFD), max BFD allowed for both sides and crown is less than 16mm and 25mm for the front and back, our helmets achieved 2mm lowest and 10mm highest, way passed the standard and here below is the test report
NIJ IIIA 0106.01 Compliance Tested—Our Compliance Test Reports Beat Most Of The Competitors Since They Have Only Single Helmet R&D Test Report. (Yet some of them only tested in China)
V50 Ballistic Limit Test Report Below—Click here to know more about V50 and why this is important.
Testimonial from our customer
My name is Richard Lowry,
I have just bought one of these helmets, and wanted to give my testimonial on it.
I wanted a real Level IIIA Rated Aramid Ballistic helmet, not an Airsoft replica, there is another manufacturer producing So called ballistic Aramid fibre helmets that have no ballistic properties, so I did some searching and found these!
The quality of Finish is Very high, the fit is good, the liner adjusts properly and all the straps adjust evenly, this is a fault on "Other Manufacturers" helmets!
The quality of stitching on the straps is better than most others.
The finish, paintwork and assembly is very good.
It's compares very well against the famous US manufacturers helmet without the very high cost, restrictive sales policies regarding helmets and body armour.
And also the wait of up to Four Months for one of their items.
If you are looking for a Fast Style High Cut Tactical Helmet, there are lots of replicas out there, but this is the best I have seen and I wholeheartedly recommend this item.
The service and communications from the seller have been second to none!
And I expected delivery from China to the United Kingdom to be a long process, not so. I received tracking information and the Helmet was delivered in under Ten Days !!!
Buy one of these you will not be Disappointed
From the United Kingdom
Shipping and Returns
During the "mind change" period, you can return the goods anytime--Even in perfect condition. After we have received the returned product(s) we will first check the goods condition and proceed refund under below basis;
a) If the product is returned due to quality issue on delivery to the customer, we require evidence of pictures from customer end to support such request before return of product(s) can be accepted. Once request approved and goods returned, FULL REFUND WILL BE MADE TO YOUR ACCOUNT WITHIN 24 HOURS
b) If the product is returned due to customer's mind change, the customer needs to take care of the related shipping cost, we would really appreciate if the goods could be returned in resell condition and in its original packaging, or we will have to apply a deduction on refund based on the condition of the return goods.
Tax & Import charges
You might be required to pay Tax/import charge on delivery, please refer to your country’s import legislation and feel free to contact us if you have any question.
For below European Union countries if you choose DHL service, WE WILL TAKE CARE OF YOUR IMPORT CHARGES.
United Kingdom, Spain, Netherlands, Luxembourg, Italy, Germany, France, Belgium, Austria, Ireland, Denmark, Finland, Greece, Portugal, Sweden, Bulgaria, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slovakia, Romania
We highly appreciate your feedback on each transaction. In case you are unhappy about our products, please kindly contact us and we will try our best to accommodate your needs.
All items sold by us are guaranteed on its quality always! All photos shown in the listing are absolutely guaranteed to be taken by us. You will receive the exact item pictured and described always! Buying from us with confidence!! Check comments from our happy customers below!!!
Thank you very much for paying attention to our terms & conditions, and we look forward to have a smooth business relationship with you.